Main Menu

Credit Cards

Our Partners


Authorized Pearson Vue Test Center



TESDA

Contest

  

Hands On IT TRAINING

Cisco 1 and 2 Routers and Routing Technology


26


COURSE DURATION : 30 HRS

REMOTE LAB ACCESS : 20 HRS

CCNA Exam Review : 18 HRS (optional but reccommended)

CCNA PRACTICE EXAMS
: Unlimted HRS (optional but reccommended)

COURSE DESCRIPTION :
Average Trainee Evaluation
Evaluations in the last 12 months
10

98%
9

1%
8

1%
7

0%
6
  0%
5
  0%
4
  0%
3
  0%
2
  0%
1
  0%

This module presents you with the concepts and commands you need to configure Cisco routers in multi-protocol internetworks. 

This covers the NEW CCNA Certification Exam Code: 200-125 CCNA

During the course, you will build a Cisco network from the ground up. This experience, combined with lectures, discussions, exercises and challenging labs, will give you the hands-on experience you need to configure and maintain Cisco routers in the real world.

This training will provide students with the essential knowledge to install, configure, and operate simple routed LANs and WANs.

This course will prepare students pass the CCNA certification.

COURSE OUTCOMES :

  • Design a simple LAN using Cisco Technology
  • Design an IP addressing scheme to meet design requirements
  • Select an appropriate routing protocol based on user requirements
  • Design a simple internetwork using Cisco technology
  • Configure routing protocols
  • Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
  • Configure a router for additional administrative functionality
  • Implement a
    LAN
  • Manage system image and device configuration files
  • Perform an initial configuration on a router  

COURSE DELIVERY:

Instructor-led, classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.

ENTRY REQUIREMENTS/PRE-REQUISITES:

Students should have a working knowledge of LAN Local Area Network and have taken the following courses or its equivalent:


CISCO
LAB EQUIPMENTS:

  • CISCO Routers: 2901, 2801 and 1841
  • CISCO Switches: Catalyst 3550 Layer 3 (Multi-Layer) series, Catalyst 3750 Series Layer 3, 2900 Series
  • WIRELESS: AIRONET 1242AG LWAPP

CCNA EXAM ONLINE REVIEW:

Go to Online CCNA review for enrolled students only

TOPICS COVERED

Chapter 1: Network Fundamentals

1.1 Compare and contrast OSI and TCP/IP models

1.2 Compare and contrast TCP and UDP protocols

1.3 Describe the impact of infrastructure components in an enterprise network
     • Firewalls
     • Access points
     • Wireless controllers

1.4 Describe the effects of cloud resources on enterprise network architecture
     • Traffic path to internal and external cloud services
     • Virtual services
     • Basic virtual network infrastructure

1.5 Compare and contrast collapsed core and three-tier architectures

1.6 Compare and contrast network topologies
     • Star
     • Mesh
     • Hybrid

1.7 Select the appropriate cabling type based on implementation requirements

1.8 Apply troubleshooting methodologies to resolve problems
     • Perform and document fault isolation
     • Resolve or escalate
     • Verify and monitor resolution

1.9 Configure, verify, and troubleshoot IPv4 addressing and subnetting

1.10 Compare and contrast IPv4 address types
     • Unicast
     • Broadcast
     • Multicast

1.11 Describe the need for private IPv4 addressing

1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment

1.13 Configure, verify, and troubleshoot IPv6 addressing

1.14 Configure and verify IPv6 Stateless Address Auto Configuration

1.15 Compare and contrast IPv6 address types
     • Global unicast
     • Unique local
     • Link local
     • Multicast
     • Modified EUI 64
     • Autoconfiguration
     • Anycast

Chapter 2: Routing Technologies

2.1 Describe the routing concepts
     • Packet handling along the path through a network
     • Forwarding decision based on route lookup
     • Frame rewrite

2.2 Interpret the components of a routing table
     • Prefix
     • Network mask
     • Next hop
     • Routing protocol code
     • Administrative distance
     • Metric
     • Gateway of last resort

2.3 Describe how a routing table is populated by different routing information sources
     • Admin distance

2.4 Compare and contrast static routing and dynamic routing

2.5 Compare and contrast distance vector and link state routing protocols

2.6 Compare and contrast interior and exterior routing protocols

2.7 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
     • Default route
     • Network route
     • Host route
     • Floating static

2.8 Configure, Verify, and Troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.9 Configure, Verify, and Troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.10 Configure, Verify, and Troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)

2.11 Configure, Verify, and Troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

2.12 Configure, Verify, and Troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)

2.13 Troubleshoot basic Layer 3 end-to-end connectivity issues
2.14 Configure and Verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)

2.15 Configure, verify, and troubleshoot basic device hardening
     • Local authentication
     • Secure password
     • Access to device
          a. Source address
          b. Telnet/SSH
     • Login banner

Chapter 3: Infrastructure Services

3.1 Describe DNS lookup operation

3.2 Troubleshoot client connectivity issues involving DNS

3.3 Configure and verify DHCP on a router (excluding static reservations)
     • Server
     • Relay
     • Client
     • TFTP, DNS, and gateway options

3.4 Troubleshoot client- and router-based DHCP connectivity issues

3.5 Configure, verify, and troubleshoot inside source NAT
     • Static
     • Pool
     • PAT

3.6 Configure and verify NTP operating in a client/server mode


PRACTICE Exams: Unlimited HRS (optional but reccomended)

Review Materials will be provided for FREE

COURSE FEE :

with FREE Flowing Coffee
 
COURSE SCHEDULES :
 
  


Other Short Courses..


What do you think?

Leave a Question

 



Inquiries

Page 4 of 10 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - | Last | >> |


@ jake

Yes, pwede basta may knowledge po kayo sa basic networking.
hi pwde po aku mag enroll...fresh graduate po aku ng BSIT
@ Kel

Kailangan mo munang tapusin ang CISCO 1 to 4 training bago ka magtake ng CCNA exam. Pagcertified ka na pwede ka ng kumuha ng Secutiry, Wireless and Voice or CCNP exam.
Kapag po ba nag take CCNA exam kylngan ntapos mo yung 4 CCNA? (Bootcamp, Security, Wireless, Voice)? or kahit isang CCNA training lng like CCNA bootcamp pde kana mag take ng exam? Pa advice po thanks.
is this course equivalent to icnd 1?
@ De Rama, Val

Ipopost po namin soon dito sa aming website ung next set of schedules. Keep posted.
Good Day, pasend naman ng next set of schedule
@ Arlene

Pwede po kayong gumawa ng inyong reservation online through this link http://www.cnctc.edu.ph/reservation_form.php still open po ang class for enrollment.
Hi good evening, gusto ko pa sana magpa reserve. Bundia location, if it is still open, 3 to 9pm every sunday. thank you
I would really appreciate if i could receive an email regarding this request. thank you.
@ JP

You can take directly CCNA training as long as may knowledge na po kayo sa PC Troubleshooting at PC Networking. CCNA certification exam cost USD295. Thank you.
@ Renz

For installment basis po ang course fee ay P11,000. Upon enrollment ang downpayment po ay P5,500 then ang remaining balance po ay babayaran sa midway ng training. Thank you.
magkano po pag with exam?.. meron bang CCENT..? at IT graduate ako.. no need n ba s pre-requisites?

Thanks..
Hello po, ask ko lang, pano po ung pagprocess ng insgtallment sa pagbabayad? Thank you
Hello po, ask ko lang, pano po ung pagprocess installment na pagbabayad? Thank you
@ Mark Henry

Yes, mag-oopen po kami ng every Saturday 3pm to 9pm para sa March. Please keep in touch on the website for the updates. Thank you.
For CCNA 1&2, meron po ba kau sched na March ang start every SAT 3pm to 9pm???
@ Mikel

Kailangan may knowledge po kayo sa basic networking before magenroll ng CISCO 1 & 2 course.
Hi, Ask lang po need po b na mag review po aq ult before to enroll this course or may refresher naman n mang yayari. kasi medyo wla n po aq alam, dhil sa work q n di scope itong mga to. pero need q tong course q specially sa ntapos q.
@ Roberto Jalandoni

Fee for CISCO 1 & 2 is 10500 pesos in cash and for CISCO 3 & 4 is 10500 pesos in cash also and for CCNA exam cost 295USD or 15800 in peso.
@ Marc Leo O. Santelices

We suggest na itake po muna ninyo ung PC Hardware and Software Troubleshooting and Repair w/ OJT sumunod PC LAN/WAN Setup and Windows 2008 Server Active Directory Infrastructure Administration and then CISCO 1 to 4 training.
sir if i want to take the training and exam how much po?
Good pm po, tapos po ako nang BSCS pero wala po akong masyadong alam sa computer o kaya kulang lang po sa practice...anu po ba ang dapat kung kunin na course sainyo?salamat po
@ Edwin Senas

Ang fee for CISCO 1 & 2 is 10500 pesos in cash and for CISCO 3 & 4 is 10500 pesos in cash din po.
good day! gusto ko pong mag exam ng CCNA pero bago ako mag exam gusto ko pong mag training muna para sure maka pasa kung pwede, at magkano ang charge? maraming salamat po!
@ Inna Calimbahin

Ang course na kailangan mong itake is CISCO 1 & 2 at CISCO 3 & 4 training. After this course magtake ka CCNA exam para maging certified ka. Pwede kang magpaskedyul ng exam anytime kung kailan ka ready.
Hello,

Ano at kailan po yung unang certification exam na itatake para sa beginner? at ano po yung corresponding training na meron kayo para doon?
Maraming salamat.
@ john

Ang CCNA Bootcamp (Fast Track) po ay cover ang Cisco 1 and 2, Cisco 3 and 4 at ang Cisco 1 and 2 ay (slow track) training. Thanks.
ano po pinagkaiba ng ccna bootcamp fastrack sa cisco 1 and 2
@ jordan r. arbo

Enrollment is still open. We need 3 participants to start the class. You can make your reservation online through this link http://www.cnctc.edu.ph/reservation_form.php
@ john mark

Kung meron na po kayong idea kung pano magconfigure ng cisco routers pwede kayo magtake ng CISCO 3 & 4 training.
Do you have a confirmed schedule for ccna 1 this coming sunday?thank you very much po
Sir/Mam tanung ko lng po kung pwede mag cisco 3 and 4 po kahit d po nag cisco 1 and 2 my alam naman po ako sa routers cabling and server 2008 networking po
@ chris john apinan

Hello, yes mag oopen po kami ng February schedule for every Saturday only. Please keep posted. Thank you.
@ nix

Inform ka po namin 2-3 days before ng training kung nameet na minimum of 3 students para magpush through ang class. Thank you.
Hi,

Is there any schedule for the month of february saturday only.?

Thank you!
gusto ko pa sana mag enroll sa jan 11 kaso mkhang ako lang mag eenroll at kahit reservation wala .. mag p-push through padin ba kahit ganun ..
@ Nathaniel Puno

Wala pong requirements/documents na kailangan upon enrollment. Yes, pwede po kayong magenrol sa CISCO since may background naman po kayo.
Good day po, gusto ko po sana take yung course kaso wala po ako requirements, pero may knowledge po ako sa LAN, actually may background na po ako sa CISCO kaso di ko lang po natapos, possible po ba na i-take ko yung course?
@ Rio porto

Ang office hour po ay Monday to Friday 9am to 5pm, Saturday and Sunday 9am to 3pm. Thank you.
Ay sige po, ppunta nlnang po ako jan sa inyo.
@ Rio Porto

Certificate of completion after the training lang po ang ibibigay namin sa inyo. Kung gusto ninyong maging certified CCNA kailangan po ninyong ipasa ang exam once na maipasa ninyo may marereciv kayong certificate galing kay CISCO at 3 years ang validity.
pero may certificate na din po yun? tapos in rerenew nalang every year? salamat po
@ Rio porto

Hindi po nasa sa inyo kung gusto ninyong mag exam or hindi.
Good day!

Required po ba mag-exam?
@ Rio porto

Yes open pa rin po for enrollment. Pwede kayog gumawa ng inyong reservation online through this link http://www.cnctc.edu.ph/reservation_form.php
good day!

open parin po ba yung 11/23/2015?
salamat po..
@ jaime

Ang fee for CISCO 1 & 2 is 10500 pesos in cash and for CISCO 3 & 4 is 10500 pesos din po. Located kami sa Espana, Mania and Buendia, Makati. Pwede po kayong magtake ng exam sa Espana, Manila main office.
send me info ng sisco 1 to 4 at magkano ang babayaran kada module? and san area malapit sa caloocan zabarte rd. kami.. at san po pwede mag exam ng sisco?
same lang po ba siya sa cicso version 5?
@ ghe

CCNAX 200-120
Page 4 of 10 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - | Last | >> |

  
CNCTC Live Chat Inquiry

Job Openings

Subscribe

Stay Informed Subscribe

Name *

Email *