Main Menu

Credit Cards

Our Partners

Authorized Pearson Vue Test Center





Cisco 1 and 2 Routers and Routing Technology




CCNA Exam Review : 18 HRS (optional but reccommended)

: Unlimted HRS (optional but reccommended)

Average Trainee Evaluation
Evaluations in the last 12 months





This module presents you with the concepts and commands you need to configure Cisco routers in multi-protocol internetworks. 

This covers the NEW CCNA Certification Exam Code: 200-125 CCNA

During the course, you will build a Cisco network from the ground up. This experience, combined with lectures, discussions, exercises and challenging labs, will give you the hands-on experience you need to configure and maintain Cisco routers in the real world.

This training will provide students with the essential knowledge to install, configure, and operate simple routed LANs and WANs.

This course will prepare students pass the CCNA certification.


  • Design a simple LAN using Cisco Technology
  • Design an IP addressing scheme to meet design requirements
  • Select an appropriate routing protocol based on user requirements
  • Design a simple internetwork using Cisco technology
  • Configure routing protocols
  • Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
  • Configure a router for additional administrative functionality
  • Implement a
  • Manage system image and device configuration files
  • Perform an initial configuration on a router  


Instructor-led, classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.


Students should have a working knowledge of LAN Local Area Network and have taken the following courses or its equivalent:


  • CISCO Routers: 2901, 2801 and 1841
  • CISCO Switches: Catalyst 3550 Layer 3 (Multi-Layer) series, Catalyst 3750 Series Layer 3, 2900 Series


Go to Online CCNA review for enrolled students only


Chapter 1: Network Fundamentals

1.1 Compare and contrast OSI and TCP/IP models

1.2 Compare and contrast TCP and UDP protocols

1.3 Describe the impact of infrastructure components in an enterprise network
     • Firewalls
     • Access points
     • Wireless controllers

1.4 Describe the effects of cloud resources on enterprise network architecture
     • Traffic path to internal and external cloud services
     • Virtual services
     • Basic virtual network infrastructure

1.5 Compare and contrast collapsed core and three-tier architectures

1.6 Compare and contrast network topologies
     • Star
     • Mesh
     • Hybrid

1.7 Select the appropriate cabling type based on implementation requirements

1.8 Apply troubleshooting methodologies to resolve problems
     • Perform and document fault isolation
     • Resolve or escalate
     • Verify and monitor resolution

1.9 Configure, verify, and troubleshoot IPv4 addressing and subnetting

1.10 Compare and contrast IPv4 address types
     • Unicast
     • Broadcast
     • Multicast

1.11 Describe the need for private IPv4 addressing

1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment

1.13 Configure, verify, and troubleshoot IPv6 addressing

1.14 Configure and verify IPv6 Stateless Address Auto Configuration

1.15 Compare and contrast IPv6 address types
     • Global unicast
     • Unique local
     • Link local
     • Multicast
     • Modified EUI 64
     • Autoconfiguration
     • Anycast

Chapter 2: Routing Technologies

2.1 Describe the routing concepts
     • Packet handling along the path through a network
     • Forwarding decision based on route lookup
     • Frame rewrite

2.2 Interpret the components of a routing table
     • Prefix
     • Network mask
     • Next hop
     • Routing protocol code
     • Administrative distance
     • Metric
     • Gateway of last resort

2.3 Describe how a routing table is populated by different routing information sources
     • Admin distance

2.4 Compare and contrast static routing and dynamic routing

2.5 Compare and contrast distance vector and link state routing protocols

2.6 Compare and contrast interior and exterior routing protocols

2.7 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
     • Default route
     • Network route
     • Host route
     • Floating static

2.8 Configure, Verify, and Troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.9 Configure, Verify, and Troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.10 Configure, Verify, and Troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)

2.11 Configure, Verify, and Troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

2.12 Configure, Verify, and Troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)

2.13 Troubleshoot basic Layer 3 end-to-end connectivity issues
2.14 Configure and Verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)

2.15 Configure, verify, and troubleshoot basic device hardening
     • Local authentication
     • Secure password
     • Access to device
          a. Source address
          b. Telnet/SSH
     • Login banner

Chapter 3: Infrastructure Services

3.1 Describe DNS lookup operation

3.2 Troubleshoot client connectivity issues involving DNS

3.3 Configure and verify DHCP on a router (excluding static reservations)
     • Server
     • Relay
     • Client
     • TFTP, DNS, and gateway options

3.4 Troubleshoot client- and router-based DHCP connectivity issues

3.5 Configure, verify, and troubleshoot inside source NAT
     • Static
     • Pool
     • PAT

3.6 Configure and verify NTP operating in a client/server mode

PRACTICE Exams: Unlimited HRS (optional but reccomended)

Review Materials will be provided for FREE


with FREE Flowing Coffee

Other Short Courses..

What do you think?

Leave a Question



Page 5 of 10 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - | Last | >> |

good day!

open parin po ba yung 11/23/2015?
salamat po..
@ jaime

Ang fee for CISCO 1 & 2 is 10500 pesos in cash and for CISCO 3 & 4 is 10500 pesos din po. Located kami sa Espana, Mania and Buendia, Makati. Pwede po kayong magtake ng exam sa Espana, Manila main office.
send me info ng sisco 1 to 4 at magkano ang babayaran kada module? and san area malapit sa caloocan zabarte rd. kami.. at san po pwede mag exam ng sisco?
same lang po ba siya sa cicso version 5?
@ ghe

CCNAX 200-120
anong version po ng cisco ang tinuturo niyo ho?
@ ghe

P10,500 po ang course fee para sa Cisco 1 and 2 na training.
@ harry

Eto po complete address Rm 208 UPY Bldg., Gil Puyat Ave. (formerly Buendia Ave) corner Marconi St. Palanan Makati City. As long as may knowledge na po kayo sa pre requisite course pwede na po kayong mag enroll sa CISCO 1 AND 2 training.
also, anong version po ng CISCO training course nyo? is it version 5? Waiting for your response. Thank you
bakit po sa iba per course ay 60 hours each? bakit po sa inyo total of 50 hours lang para sa 2 trainings na cisco1 and 2? sigurado po ba na madidiscuss lahat? Thanks
Ang training fee po ba na 10,000 pesos ay for cisco1 and 2 na ba? or 10K each?
hi po, ask ko lang sa banda po sa bundia makati yung branch nyo? and ask ko din po kung required ba na kumuha ka ng pre requisite before ka mag take ng cisco 1 & 2 or bsta may alam ka about dun sa pre requisite eh pede munang itake yung cisco 1 & 2?
@ Joey Arguelles

Wala po. Located lang kami sa Espana, Manila and Buendia, Makati.
Wla ba kayung branch sa iloilo city that offers cisco 1 & 2 course?
@ Mark Jason D. Garcia

Wala pong requirements upon enrollment. Complete address po namin Rm 210 Dona Amparo Bldg., Espana Blvd. corner G. Tolentino St. Sampaloc Manila. Kailangan may knowledge na po kayo sa PC LAN/WAN Setup and Windows 2003 Server Active Directory Infrastructure Administration bago po ninyo itake/ienroll ang CISCO 1 & 2 training.
Saan po kayo sa espanya? at anu anu po requirements para maka enroll ng cisco 1 & 2 ?
COE graduate po ako may kailangan pa ba ko unahin bago mag cisco 1 & 2
@ Asnawi R.

Yes, magkakaroon po kami ng schedule for March 2016 for CISCO 1 & 2. Keep posted. Hindi po kasali ang exam fee sa 10,500.
my schedule po kyo sa CCNA 1-2 sa MARCH 2016? dto pa kc ako abroad plan ko mag enroll pa uwi ko next yr. ask ko rin po kung yung 10,500 kasali na yung cerfied exam ng cisco..
@ Aaron Torrecampo

Yes, you can enroll directly to this course as long as you have knowledge in PC LAN/WAN Setup and Windows 2003 Server Active Directory Infrastructure Administration.
good afternoon im interested to take this course can i take this course without taking up the pre-requisites thanks
@ Romark Rodil

Yes, pwede po kayong mag enroll for CISCO 1 to 4 as long as marunong na po kayo sa PC Networking.

Pede po ba magenroll diretso na ng CCNA 1-4 kpag graduate ng BSIT?

Please send me an update at

Thank you!
@ Novi Ventura

We are located at Rm 208 UPY Bldg., Gil Puyat Ave. (formerly Buendia Ave) corner Marconi St. Palanan Makati City. Please see this link to view the site map
in which part of Buendia is the training center located? Im interested in taking up CCNA 1-4
@ Narvic

Yes po magkaiba.
clarification lang po, iba ba bayad ng traing at exam?
@ Novi Ventura

Yes, they will discuss all the topics in 5 days not 4 days.
Can we really cover Cisco module 1 and 2 in four days?
@ Patrick M

Kung may knowledge na po kayo sa PC LAN/WAN Setup and Windows 2003 Server Active Directory Infrastructure Administration pwede na po ninyong itake ang CISCO 1 & 2 training.

Kailangan po pa ba kumuha ng "PC LAN/WAN Setup and Windows 2003 Server Active Directory Infrastructure Administration - KB0103" sa inyo as well before makakuha ng Cisco course? Kahit may working knowledge na? Like as in strict prerequisite ba sya?

@ Jing calumpit

Meron po kaming every Saturday schedule from 9am to 3pm or 3pm to 9pm on August 08 to September 05, 2015 sa Espana, Manila.
wala po bang week-end(saturday) class sa espana ofc nyo po?
@ nix

Yes meron po kami M to F 9-3pm Aug-03-2015 to Aug-07-2015 and M to F 9-3pm Aug-10-2015 to Aug-14-2015. To make your reservation online please see this link
may schedule din po ba for august sa may espana manila?
@ kurtmarlon

Hindi nyo po kailangang magenroll, magtake nalang kayo ulit ng exam para marenew ang CCNA certification ninyo.
sir ask ko pala if expired na un certificate.mag eenroll po ba at mag eexam ule para maging valid un certificate at same again ng fee at exam fee? thanks
@ kurtmarlon

ok thank you
@ Bernadette Cabrales

Yes pwede po kayong dumiretso sa CISCO 1 & 2 as long as may knowledge na po kayo sa prerequisite course. Meron pong certificate of completion after the training.
@ KC

Ang down payment for CISCO 1 & 2 is 5,500 pesos.
Hi! Can i take the CISCO 1&2 training without taking the pre-requisite training since IT graduate naman po ako (4yrs.). Tsaka po may certificate po ba after nang training without taking the exam? Thank you!
@ kurtmarlon

3 years validity ng CCNA Certification.
about naman po sa certificate may expiration po ba sya?
@ Eric

We suggest po na tapusin nyo muna ung CISCO 1 to 4 training bago magtake ng CCNA exam.
@ kurtmarlon

Punta po muna kayo sa OWWA office to inquire kung papano magfile ng scholarship program nila.
may separate exams po ba ang cisco 1&2 and cisco 3&4 or isang exam lng pag natapos mo na yung apat? thanks!
sir ask lang po kung paano maapply sa inyo yung OWWA kasi balak ko po pag uwi ko next year mag training. thanks.
thanks po
@ kurt Marlon

Hindi po kasama ung exam fee, for the training lang po ung 10500 na fee. Ang CCNA exam fee is 295USD or 14868 in peso. Yes tumatanggap po kami ng OWWA scholars.
Page 5 of 10 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - | Last | >> |

CNCTC Live Chat Inquiry

Job Openings


Stay Informed Subscribe

Name *

Email *