Main Menu

Credit Cards

Our Partners


Authorized Pearson Vue Test Center



TESDA

Contest

  

Hands On IT TRAINING

Cisco 1 and 2 Routers and Routing Technology


26


COURSE DURATION : 30 HRS

REMOTE LAB ACCESS : 20 HRS

CCNA Exam Review : 18 HRS (optional but reccommended)

CCNA PRACTICE EXAMS
: Unlimted HRS (optional but reccommended)

COURSE DESCRIPTION :
Average Trainee Evaluation
Evaluations in the last 12 months
10

98%
9

1%
8

1%
7

0%
6
  0%
5
  0%
4
  0%
3
  0%
2
  0%
1
  0%

This module presents you with the concepts and commands you need to configure Cisco routers in multi-protocol internetworks. 

This covers the NEW CCNA Certification Exam Code: 200-125 CCNA

During the course, you will build a Cisco network from the ground up. This experience, combined with lectures, discussions, exercises and challenging labs, will give you the hands-on experience you need to configure and maintain Cisco routers in the real world.

This training will provide students with the essential knowledge to install, configure, and operate simple routed LANs and WANs.

This course will prepare students pass the CCNA certification.

COURSE OUTCOMES :

  • Design a simple LAN using Cisco Technology
  • Design an IP addressing scheme to meet design requirements
  • Select an appropriate routing protocol based on user requirements
  • Design a simple internetwork using Cisco technology
  • Configure routing protocols
  • Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
  • Configure a router for additional administrative functionality
  • Implement a
    LAN
  • Manage system image and device configuration files
  • Perform an initial configuration on a router  

COURSE DELIVERY:

Instructor-led, classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.

ENTRY REQUIREMENTS/PRE-REQUISITES:

Students should have a working knowledge of LAN Local Area Network and have taken the following courses or its equivalent:


CISCO
LAB EQUIPMENTS:

  • CISCO Routers: 2901, 2801 and 1841
  • CISCO Switches: Catalyst 3550 Layer 3 (Multi-Layer) series, Catalyst 3750 Series Layer 3, 2900 Series
  • WIRELESS: AIRONET 1242AG LWAPP

CCNA EXAM ONLINE REVIEW:

Go to Online CCNA review for enrolled students only

TOPICS COVERED

Chapter 1: Network Fundamentals

1.1 Compare and contrast OSI and TCP/IP models

1.2 Compare and contrast TCP and UDP protocols

1.3 Describe the impact of infrastructure components in an enterprise network
     • Firewalls
     • Access points
     • Wireless controllers

1.4 Describe the effects of cloud resources on enterprise network architecture
     • Traffic path to internal and external cloud services
     • Virtual services
     • Basic virtual network infrastructure

1.5 Compare and contrast collapsed core and three-tier architectures

1.6 Compare and contrast network topologies
     • Star
     • Mesh
     • Hybrid

1.7 Select the appropriate cabling type based on implementation requirements

1.8 Apply troubleshooting methodologies to resolve problems
     • Perform and document fault isolation
     • Resolve or escalate
     • Verify and monitor resolution

1.9 Configure, verify, and troubleshoot IPv4 addressing and subnetting

1.10 Compare and contrast IPv4 address types
     • Unicast
     • Broadcast
     • Multicast

1.11 Describe the need for private IPv4 addressing

1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment

1.13 Configure, verify, and troubleshoot IPv6 addressing

1.14 Configure and verify IPv6 Stateless Address Auto Configuration

1.15 Compare and contrast IPv6 address types
     • Global unicast
     • Unique local
     • Link local
     • Multicast
     • Modified EUI 64
     • Autoconfiguration
     • Anycast

Chapter 2: Routing Technologies

2.1 Describe the routing concepts
     • Packet handling along the path through a network
     • Forwarding decision based on route lookup
     • Frame rewrite

2.2 Interpret the components of a routing table
     • Prefix
     • Network mask
     • Next hop
     • Routing protocol code
     • Administrative distance
     • Metric
     • Gateway of last resort

2.3 Describe how a routing table is populated by different routing information sources
     • Admin distance

2.4 Compare and contrast static routing and dynamic routing

2.5 Compare and contrast distance vector and link state routing protocols

2.6 Compare and contrast interior and exterior routing protocols

2.7 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
     • Default route
     • Network route
     • Host route
     • Floating static

2.8 Configure, Verify, and Troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.9 Configure, Verify, and Troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.10 Configure, Verify, and Troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)

2.11 Configure, Verify, and Troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

2.12 Configure, Verify, and Troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)

2.13 Troubleshoot basic Layer 3 end-to-end connectivity issues
2.14 Configure and Verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)

2.15 Configure, verify, and troubleshoot basic device hardening
     • Local authentication
     • Secure password
     • Access to device
          a. Source address
          b. Telnet/SSH
     • Login banner

Chapter 3: Infrastructure Services

3.1 Describe DNS lookup operation

3.2 Troubleshoot client connectivity issues involving DNS

3.3 Configure and verify DHCP on a router (excluding static reservations)
     • Server
     • Relay
     • Client
     • TFTP, DNS, and gateway options

3.4 Troubleshoot client- and router-based DHCP connectivity issues

3.5 Configure, verify, and troubleshoot inside source NAT
     • Static
     • Pool
     • PAT

3.6 Configure and verify NTP operating in a client/server mode


PRACTICE Exams: Unlimited HRS (optional but reccomended)

Review Materials will be provided for FREE

COURSE FEE :

with FREE Flowing Coffee
 
COURSE SCHEDULES :
 
  


Other Short Courses..


What do you think?

Leave a Question

 



Inquiries

Page 1 of 10 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - | Last | >> |


@ Jhun

You can directly enroll Cisco 1 and 2 & Cisco 3 and 4 training provided you have already knowledge/background in PC Troubleshooting and PC Networking. Thank you.
i just want to clear if you won't be accepting enrollees that hasn't taken kb0101 and kb0103 for ccna 1&2 and ccna 3&4. tnx
@ Lloyd

Ang sunod na schedule is on April 30 to May 28, 2017 every Sunday sa Espana, Manilat at sa May 14 to June 11, 2017 naman sa Buendia, Makati. Gawa po kayo ng inyong reservation online sa link na to http://www.cnctc.edu.ph/reservation_form.php para mainform namin kayo kung tuloy na po ang class.
Kelan po ang reschedule?
Pa message po, or sa email kung kelan ang confirmed schedule. . .para mkasali po ako :D thanks
@ Lloyd

Nareschedule po ang training ng Sunday schedule.
good pm
natuloy po ba yung schedule
Sun 9-3pm 04-23-2017 05-21-2017
@ Jeff

Eto po Telephone Number: 889-6042 to 43.
ano pong number ni maam Rose, tatawag nalang po ako
@ Jeff

Pakiskip po ang Student number. Umpisahan ninyo dun sa First name.
Reservation does not proceed without student number. Pano po kukuha ng student number, wala pa po ako nun.
@ Jeff

Gawa po kayo ng inyong reservation through this link http://www.cnctc.edu.ph/reservation_form.php magiinform po kami sa inyo 2 days before if tuloy na po ang class.
Good PM,

Tuloy na po ba yung Sun 9-3pm 04-23-2017 05-21-2017?

sasale po ako

Jeff
@ Ava

Yes pwede kayong kumuha ng CISCO 1 & 2 training basta may knowledge na po kayo sa PC Networking.
@ Neil Azurin

It's an option if you want to bring your own laptop, though we have computers available in the training room.
Hello,

Should students bring their own laptops?

Thanks,
Comp secretarial ung course q before, calcenter agent aq ngyn. Pwde bq kumuha ng cisco1 and 2? Gusto q mgkarun ng idea regarding i.t, course para s work q. Thanks
@ richard

Kailangan may basic computer knowledge po kayo.
may prerequisites po ba ang comptia A+?
Good day po..

OFW po ako at gusto ko pong magtraining ng Computer Networking. Accredited po ba ung training ceneter nyo ng OWWA? meaning tumatanggap po ba kayo ng scholar ng OWWA..

Thanks po in advance.
@ paul

Hindi po nagstart ang class nung Sunday kasi kulang ng participants. Minimum of 3 participants bago magstart ang class. Next skedyul po is on April 09, 2017. Gawa po kayo ng inyong reservation through this link http://www.cnctc.edu.ph/reservation_form.php
hi, pwede humabol dun sa march 26 class sa buendia?
@ John Paul

The next schedule will be on April 02 to May 07, 2017 every Sunday from 9am to 3pm.
@ clack kim castro

Unfortunately, we do not have branch in Baguio City. We are only located at Espana, Manila and Buendia, Makati.
Sun 9-3pm 03-26-2017 04-30-2017 open -- 3

Hi, re:ccna 1-2

when will this course begin
don't you have any available training schedules in terms of north luzon like in baguio city?
@ Diana Corena A Rusiana,

Unfortunately, we do not have branch in cebu. We are located only at Espana, Manila and Buendia, Makati.
do you have in cebu?
@ Herbert

Pwede po kayong magtake ng exam sa aming Main office sa Espana, Manila.
Good Day!

halimbawa natapos yung cisco1-4. San po ang Examination center?
@ JL

Kailangan nyo po munang tapusin ang CISCO 1 AND 2 at CISCO 3 AND 4 training para makapag take ng CCNA certifcation exam at pag naipasa nyo po ang exam dun po kayo magiging CCNA certified at makakakuha ng CCNA certification.
Ahh so hindi CCNA ang Cisco 1 and 2 Routers and Routing Technology. Ano pong mga courses na may CCNA Certification?

Thanks
@ JL

Certificate of completion ang ibibigay namin sa ninyo after the training.
Good PM,

May CCNA Certificate na po ba yung
Cisco 1 and 2 Routers and Routing Technology course? mag enroll sana ako.
@ Jeff

Please see this link to make a reservation online http://www.cnctc.edu.ph/reservation_form.php

Espana, Manila Tel nos. 7362032 / 7365196

Buendia, Makati Tel nos. 8896042 to 43 / 2395577
pa reserve po ng slot for March 5, 2017 Sunday.
3pm to 9pm. . . ano po contact number nyo, tatawag po ako sa sabado to confirm.

Jeff
09157867411
@ Jeff

Open po ang March 04, Saturday 9am to 3pm/3pm to 9pm at March 05, Sunday 9am to 3pm/3pm to 9pm sa Buendia Makati. Minimum of 3 participants po ang kailangan para magpush through ang class.
Hi

Sorry hindi ko na indicate, im looking for a weekend schedule for March sana. Im working at night during weekdays kase, Thanks

Jeff
@ Jeff

Meron na po kaming open schedule for weekdays sked. By next week ipopost po namin ang weekend sked for Mach. Keep posted for the updates.
Hello

Im waiting for the March class for Buendia kung meron na

Thanks

Jeff
Hello, Interested ako sa Schedule na Feb. 26, 2017 for cisco 1 and 2. Cno gusto sumabay?
@ Michael Jim Timosa

Kung may knowledge na po kayo sa PC LAN/WAN pwede na po kayong magenroll for CISCO 1 & 2 pero kung wala kailangan muna ninyo dumaan sa prerequisite course.
Hello. I would like to enroll for CISCO 1 pero nakita ko itong requirements na to <<pc-lanwan-setup-and-windows-2008-server-active-directory-infrastructure-administration>> I've been waiting for that requirement to filled in currently 2 lang nagpaschedule for Saturday class, napakatagal ko hinintay na mag start yung PC WAN LAN, until now still need 1 more student. Need ba talaga PC WAN LAN class for Cisco 1?
@ Arvin A. Balubayan

Please give us a call at 736-2032 in Manila, 889-6042/43 in Makati. Office hour is Monday to Friday 9am to 5pm, Saturday and Sunday 9am to 3pm. You can make a course reservation on the website through this link http://www.cnctc.edu.ph/reservation_form.php
Mag eenroll po sana ako para bukas
Wala po sumasagot sa tawag ko
@ jm0821

Hello, mag-oopen po kami ng Saturday and Sunday para sa schedule ng March. Please keep in touch for the updates. Thank you.
Hi may schedule na po ba this March for cisco 1 and 2 na saturday or sunday?
@ Chan

Open po kami ng Monday to Friday 9am to 5pm, Saturday and Sunday 9am to 3pm para magbayad ng course fee. Minimum of 3 participants po ang kailangan para mag push through ang class. Thank you.
sir pde mag bayad directly sa office 2weeks before the desired schedule? tutuloy ba un training kahit onti lang nag register?
@ Jeff

Yes, the training duration is 5 meetings from Monday to Friday.
Page 1 of 10 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - | Last | >> |

  
CNCTC Live Chat Inquiry

Subscribe

Stay Informed Subscribe

Name *

Email *