Main Menu

Credit Cards

Our Partners


Authorized Pearson Vue Test Center



TESDA

Contest

  

Hands On IT TRAINING

Cisco 1 and 2 Routers and Routing Technology


26


COURSE DURATION : 30 HRS

REMOTE LAB ACCESS : 20 HRS

CCNA Exam Review : 18 HRS (optional but reccommended)

CCNA PRACTICE EXAMS
: Unlimted HRS (optional but reccommended)

COURSE DESCRIPTION :
Average Trainee Evaluation
Evaluations in the last 12 months
10

98%
9

1%
8

1%
7

0%
6
  0%
5
  0%
4
  0%
3
  0%
2
  0%
1
  0%

This module presents you with the concepts and commands you need to configure Cisco routers in multi-protocol internetworks. 

This covers the NEW CCNA Certification Exam Code: 200-125 CCNA

During the course, you will build a Cisco network from the ground up. This experience, combined with lectures, discussions, exercises and challenging labs, will give you the hands-on experience you need to configure and maintain Cisco routers in the real world.

This training will provide students with the essential knowledge to install, configure, and operate simple routed LANs and WANs.

This course will prepare students pass the CCNA certification.

COURSE OUTCOMES :

  • Design a simple LAN using Cisco Technology
  • Design an IP addressing scheme to meet design requirements
  • Select an appropriate routing protocol based on user requirements
  • Design a simple internetwork using Cisco technology
  • Configure routing protocols
  • Configure IP addresses, subnet masks, and gateway addresses on routers and hosts
  • Configure a router for additional administrative functionality
  • Implement a
    LAN
  • Manage system image and device configuration files
  • Perform an initial configuration on a router  

COURSE DELIVERY:

Instructor-led, classroom/laboratory-delivery learning model with structured hands-on and minds-on activities and laboratory activities.

ENTRY REQUIREMENTS/PRE-REQUISITES:

Students should have a working knowledge of LAN Local Area Network and have taken the following courses or its equivalent:


CISCO
LAB EQUIPMENTS:

  • CISCO Routers: 2901, 2801 and 1841
  • CISCO Switches: Catalyst 3550 Layer 3 (Multi-Layer) series, Catalyst 3750 Series Layer 3, 2900 Series
  • WIRELESS: AIRONET 1242AG LWAPP

CCNA EXAM ONLINE REVIEW:

Go to Online CCNA review for enrolled students only

TOPICS COVERED

Chapter 1: Network Fundamentals

1.1 Compare and contrast OSI and TCP/IP models

1.2 Compare and contrast TCP and UDP protocols

1.3 Describe the impact of infrastructure components in an enterprise network
     • Firewalls
     • Access points
     • Wireless controllers

1.4 Describe the effects of cloud resources on enterprise network architecture
     • Traffic path to internal and external cloud services
     • Virtual services
     • Basic virtual network infrastructure

1.5 Compare and contrast collapsed core and three-tier architectures

1.6 Compare and contrast network topologies
     • Star
     • Mesh
     • Hybrid

1.7 Select the appropriate cabling type based on implementation requirements

1.8 Apply troubleshooting methodologies to resolve problems
     • Perform and document fault isolation
     • Resolve or escalate
     • Verify and monitor resolution

1.9 Configure, verify, and troubleshoot IPv4 addressing and subnetting

1.10 Compare and contrast IPv4 address types
     • Unicast
     • Broadcast
     • Multicast

1.11 Describe the need for private IPv4 addressing

1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment

1.13 Configure, verify, and troubleshoot IPv6 addressing

1.14 Configure and verify IPv6 Stateless Address Auto Configuration

1.15 Compare and contrast IPv6 address types
     • Global unicast
     • Unique local
     • Link local
     • Multicast
     • Modified EUI 64
     • Autoconfiguration
     • Anycast

Chapter 2: Routing Technologies

2.1 Describe the routing concepts
     • Packet handling along the path through a network
     • Forwarding decision based on route lookup
     • Frame rewrite

2.2 Interpret the components of a routing table
     • Prefix
     • Network mask
     • Next hop
     • Routing protocol code
     • Administrative distance
     • Metric
     • Gateway of last resort

2.3 Describe how a routing table is populated by different routing information sources
     • Admin distance

2.4 Compare and contrast static routing and dynamic routing

2.5 Compare and contrast distance vector and link state routing protocols

2.6 Compare and contrast interior and exterior routing protocols

2.7 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
     • Default route
     • Network route
     • Host route
     • Floating static

2.8 Configure, Verify, and Troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.9 Configure, Verify, and Troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)

2.10 Configure, Verify, and Troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)

2.11 Configure, Verify, and Troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

2.12 Configure, Verify, and Troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)

2.13 Troubleshoot basic Layer 3 end-to-end connectivity issues
2.14 Configure and Verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)

2.15 Configure, verify, and troubleshoot basic device hardening
     • Local authentication
     • Secure password
     • Access to device
          a. Source address
          b. Telnet/SSH
     • Login banner

Chapter 3: Infrastructure Services

3.1 Describe DNS lookup operation

3.2 Troubleshoot client connectivity issues involving DNS

3.3 Configure and verify DHCP on a router (excluding static reservations)
     • Server
     • Relay
     • Client
     • TFTP, DNS, and gateway options

3.4 Troubleshoot client- and router-based DHCP connectivity issues

3.5 Configure, verify, and troubleshoot inside source NAT
     • Static
     • Pool
     • PAT

3.6 Configure and verify NTP operating in a client/server mode


PRACTICE Exams: Unlimited HRS (optional but reccomended)

Review Materials will be provided for FREE

COURSE FEE :

with FREE Flowing Coffee
 
COURSE SCHEDULES :
 
  


Other Short Courses..


What do you think?

Leave a Question

 



Inquiries

Page 6 of 10 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - | Last | >> |


@ Mark

Yes po ang slow track training namin is CISCO 1 & 2 and then CISCO 3 & 4.
ito po ba yung slow track po for CCNA? yung Module 1 to 4?
@ Diane Navia

Rescheduled ng June 8-12 ang Cisco 1 and 2 class natin due to lack of students. Thanks.
Hi po enrolled na po ako for cisco 1 & 2 scheduled for june 1 ask ko lang po kung start na po ba bukas or extended po ng june 8? Inform niyo na lang po ako kung kelan yung 1st day jan po sa makati branch thank you po.
@ israel pilapil

May reservation na po kayo for June 1 schedule. Inform nalang po namin kayo kung matuloy o hindi po ang class.
Good pm po pa reserve po sana cisco 1&2 para po june 1 to june 5 2015, 9 to 3 pm po
@ Arvhz

If non IT graduate po kayo start kyo sa course na PC Hardware and Software Troubleshooting and Repair then PC LAN/WAN and Windows 2008 Server Active Directory tsaka nyo kunin ung CISCO 1 to 4 courses. If may knowledge kayo sa IT pwede po kayo PC LAN/WAN and Windows 2008 Server Active Directory then CISCO 1 to 4 courses.
Hello good day po.. Ito po ba ang first step sa networking career? Thanks po
@ Paqz

Your welcome :)
Thank you CNCTC I got ur message!Training will start Tomorrow.:)
ty po. ano po schedule for weekends? im working kasi. ty
@ Binoy

Meron po kami weekdays schedule on June 1 to June 05, June 08 to June 12, June 15 to June 19 at June 22 to June 26.
Hello,

Paadvise nman po schedules for June.
@ ben

Yes, pwede po kayong mag sit in. Tawag po kayo sa office namin 736-2032, 889-6042/43. Thank you.
@ Paqz

Inform po namin kayo Sir until Friday kung tuloy po ang class natin on Sunday. Thank you.
Makati branch po
Tuloy nba sa lingo May 17,9-3pm schedule?kc wla many schedule online,please reply .thanks
ask lng po nakapag training na ko dati dto last 2014 pwede ba ako mag re-attend sabi nio po kase dati for free nlng.
Tuloy na po ba sa may 17 sunday,9-3 pm schedule for CCNA 1,2? Tia
@ Luke

Unfortunately, wala po kaming ITIL training pero pwede po kayong magtake ng ITIL exam sa amin authorized testing kami ng Pearsonvue at Prometric.
@ jv

Ang coverage kasi ng INCD1 at ICND2 exam is CISCO 1 to 4 course.
Do you have training for ITIL with exam?

thanks.
i'm planning to take icnd 1 kasi muna then eventually (hopefully) this year CCNA na..
Covered na ba ng Cisco 1 and 2 nyo ung icnd exam?
hindi pa po ba sufficient yung Cisco 1 and 2 nyo po for me to pass ICND 1?
ang gagaling ng mga cisco trainors dito..


malayong malayo sa dating trainaing center na naattendan ko na.
maraming salmat po sa inyo
@ seyenour punio

You can enroll online through this link http://www.cnctc.edu.ph/reservation_form.php or visit Espana Manila or Buendia Makati office. Minimum of 3 students to push through the class. Thank you.
@ jv

Sir we suggest po na tapusin muna ang Cisco 1 and 2 at Cisco 3 and 4 training then take po kayo ng CCNA certification exam. Thank you.
how can i enroll on CISCO 1 to 4
pwede nba ako mag take ng ccent exam (icnd 1) after ng cisco 1 and 2 nyo?
@ Gab

You can enroll at CNCTC office Espana Manila or Buendia Makati. Thanks.
where can i enroll this course ?
@ Mylene Sumampong

Pag natapos nyo po ang training at exam ng CCNA. Pwede po kayong mag apply as Network Admin. Thank you.
Tanong lang po, anong mga trabaho ang pwedeng mapasukan kapag natapos ang Cisco 1 at 2 kung maipasa ang exam?
@ Lito Martinez

Yes tama po.
Good day.
For Cisco 1 and 2
Confirm ko lang po. Course duration is 30 hours, and additional 20 hours para sa remote lab at 18 hours para sa review?
Thanks
@ stan

Fee for CISCO 1 & 2 is 10,500 and for CISCO 3 & 4 is 10,500 pesos din po. Para sa CCNA Exam fee is 295USD or 14868 in peso.
@ roland

Tapusin po muna ninyo ung CISCO 1 to 4 training then kung ready na po kayo pwede na kyong kumuha ng CCNA exam.
hello po, ang 22k po ba, kasama na ang exam or separate,

thanks
kay langan ba taposing ang cisco 1 2 3 4 bago kumuha ng exam sa cisco or mag kaiba ang exam ng cisco 1 2. . at cisco 3 4. .?
@ francis

Ok lang po as long as may knowlegde kayo sa prerequiaite course which is PC Networking pwede kayong magenroll for CISCO training.
is it ok kung vocational diploma lang nkuwa at hndi graduate ng college ? PG NAG TAKE NG CISCO?
@ James,

Lahat po ng topics na cover ng CISCO 1 and 2 ay maituturo. Thank you!
Hi! ask ko lang sana. sure ba na kayang i cover lahat ng 30 hours ung topics ng cisco 1 and 2?
@ proty ciscar

Pwede pong cash or installment basis.
Hello, Panu po ba yung terms of payment??
@ fem

Hello, pag under po ng owwa scholarship cisco 1 and 2 cost P11,000 and cisco 3 and 4 cost P11,000 total amount of P22,000 then ileless po ung P14,500. Ang total remaining na babayaran nyo po ay P7,500.
hi tanong ko lng under owwa po if kkunin yung cisco 1 to 4 mgkno po?kse ang give ng owwa is 14 thousand. total po magkno nalang ang bbayaran?
@ Romel Lazaro

Yes tuloy na po ung CISCO 1 & 2 training on March 01 to March 29, every Sunday 9am to 3pm sa Buendia, Makati.
Hi! ask ko lang yan march 1 na yan tuloy na po ba yan? kc mag eenroll na sana ako now.hoping for immediate reply. thanks!
@ danniel omugtong

Inform po namin kayo sa Saturday kung tuloy na po ang class this coming Sunday.
Page 6 of 10 | << | First | 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - | Last | >> |

  
CNCTC Live Chat Inquiry

Subscribe

Stay Informed Subscribe

Name *

Email *